पूर्वोत्तर क्षेत्रीय विज्ञान एवं प्रौद्योगिकी संस्थान
North Eastern Regional Institute of Science and Technology 
deemed-to-be-university under MHRD, Govt.of India
Nirjuli - 791109, Arunachal Pradesh
Skip to main content

Digital Electronics Laboratory:


Currently all digital electronics and microprocessor labs run here for both diploma in ECE and B.Tech in ECE. The basic digital electronics EC3201/EC4100 and 4301 and digital circuit design courses needs logic analyzer, digital kits, all ICS of logic gates n flip flops for all types of combinational, sequential, synchronous and asynchronous digital circuits are designed here. The 8bit n 16 bit microprocessor kits of 8085, 8086 along with side interfacing cards for practical are here for EC4201 and EC5201. Other than this the lab has 8051 microcontroller and PIC microcontroller kits with sensors for ec4003 an elective course for diploma students and EC6035 an elective for microcontroller and embedded system design elective course for B.Tech ECE students. Moreover B.Tech and diploma ECE students use this lab during projects under 4299 and 6199+6299 courses.

Lab Incharge   
Lab Assistant   

Digital Signal Processing Laboratory:

This lab runs degree level course labs for digital signal processing for B.Tech ECE and electrical engineering students other than UG and PG project. The lab has ti6713 DSP kits along with LabVIEW of no with Elvi. Motorola embedded systems with 8/16/32 bit microcontrollers or hybrid DSP kits with code warrior software license and code composer studio with processor expert and other ide. Storage oscilloscopes and 3GHz range spectrum analyzers with project boards are also available with daughter cards of image processing and high speed ADCs and multichannel signals for DSP kits.

Lab Incharge   
Lab Assistant   

Radar and Antenna Laboratory:

The laboratory is an undergraduate laboratory. Presently two practical classes of courses EC6200 (Antenna Theory Lab) and EC6102 (Microwave Engineering Lab) are performed here. The lab is equipped with X-band microwave bench (Gunn source and Klystron source), microwave components, SICO SWR meter, DSO, power meter, spectrum analyzer, synthesized signal generator, antenna trainer, Doppler radar trainer and different antennas.

Lab Incharge   
Lab Assistant   

Communication Laboratory:

The laboratory is an undergraduate laboratory. The lab offers practical classes for the following courses EC2101, EC4102, EC3102, EC3100, EC4402, EC4200, and EC6101 for the undergraduate students. It is equipped with AM Transmitter Trainer, FM Communication Trainer, Analog signal sampling and reconstruction kit PCM trainer, TDM/PAM KIT, delta, adaptive delta modulation n demodulation kit, Analog communication trainer, Digital Communication Trainer, Function Generator, CRO,DSO etc.

Lab Incharge   
Lab Assistant   

Circuit and Measurement Laboratory:

The Circuit and Measurement Laboratory is one of the important Lab of ECE, department in which students of Base, Diploma and Degree Modules perform various experiments related to Circuit and Devices courses. This Lab is well equipped with various necessary equipment, such as Dual trace Cathode Ray Oscilloscopes, Signal generators, Analog and Digital Multimeters, various Indicating type instruments, IC testers, LCR meter, Decade resistance and inductance boxes, Dual and single regulated fixed and variable DC power supplies, all the active and passive components etc. Students perform circuit and Devices based experiments, operational amplifiers based experiments as well as some of the power electronics experiments in this lab during both the odd and even semesters

Lab Incharge   
Lab Assistant   

VLSI Laboratory:

VLSI Laboratory is one of the very important lab of the ECE department, in which the M.Tech. students of VLSI stream perform Analog and digital VLSI IC design experiment using cadence Virtuoso simulator tools in 180 nm CMOS process. During the even semester the PG student perform Digital Logic Design using Verilog and VHDL simulator software. They also perform lab using Matlab software tool in the even semester. In this lab the PG and Ph.D. students perform their project and Ph.D. research work.

Lab Incharge   
Lab Assistant   

Instrumentation Laboratory:

Instrumentation Laboratory has sufficient equipments for doing laboratory experiments of undergraduate courses (Base, Diploma, and degree module). This laboratory is well equipped with CRO, signal generators, ammeters, voltmeters, ohmmeters, power supply, and other ancillaries equipments needed for doing laboratory experiments. Undergraduate students do their experiments for courses like linear IC, Industrial Electronics, Instruments and measurements, Basic electronics, etc.

Lab Incharge   
Lab Assistant   

Electronic workshop Laboratory:

Electronic workshop Laboratory has sufficient equipments for doing laboratory experiments of base module students. This laboratory is well equipped with CRO, signal generators, ammeters, voltmeters, ohmmeters, power supply, soldering iron, drilling machine, and other ancillaries equipments needed for doing workshop experiments. Students do their experiments for courses like Basic electronics practical: Basic Electronics & Engineering Drawing, Servicing and maintenance of instruments like ammeter, voltmeter, ohmmeter, etc.

Lab Incharge   
Lab Assistant   

PG Lab II:

This lab provides a suitable environment for the post graduate and PhD research scholars of the department of Electronics & Communication Engineering. The Lab is equipped with 20HP high end PCs and server. This lab provides simulation facility for analog and digital circuits. Along with the general purpose FPGA and CPLD boards it also have high end VERTEX and SPARTAN boards with Xilinx and Orcad software. This lab is in the process of enhancing our research facilities by including more software and hardware in near future.

Lab Incharge   
Lab Assistant