Department of Mechanical Engineering

1. Singh, S., & Tiwari, R. (2018). Model based identification of crack and bearing dynamic parameters in flexible rotor systems supported with an auxiliary active magnetic bearing. Mechanism and Machine Theory, 122, 292–307. https://doi.org/10.1016/j.mechmachtheory.2018.01.006
2. Singh, S., & Tiwari, R. (2017). Model-based fatigue crack identification in rotors integrated with active magnetic bearings. JVC/Journal of Vibration and Control, 23(6), 980–1000. https://doi.org/10.1177/1077546315587146
3. Singh, S., & Tiwari, R. (2016). Model-Based Switching-Crack Identification in a Jeffcott Rotor With an Offset Disk Integrated With an Active Magnetic Bearing. Journal of Dynamic Systems, Measurement, and Control, 138(3), 031006. https://doi.org/10.1115/1.4032292

List of PFBR Reports (Confidential reports and notes of Department of Atomic Energy, related to Prototype Fast Breeder Reactor Project at IGCAR, Kalpakkam)

1. Sandeep Singh et al. (2009) Interim report on friction and wear testing of xylan coated silicon rubber vs teflon (PTFE) coated carbon steel, PFBR/31300/EXP/1075, Rev-0
2. Sandeep Singh et al. (2009) Friction and wear testing of MoS₂ coated silicon rubber vs teflon(PTFE) coated carbon steel, PFBR/31300/EXP/1074, Rev.-0

List of Conference Publications

1. S. Singh et.al.  (2003)  Design and development of a heating apparel jacket based on Joules law of heating            CARTAM-2003, P434-443
2. S. Singh et.al.  (2003)  Experimental method for forcasting the wear rate of a journal bearing and its variation with clearance space, ICME-2003at BUET , Dhaka
3. S. Singh et.al. (2005) Experimental determination of chip curl radius dependence on geometry of the chip breaker in orthogonal cutting, ISME-International conference on mechanical engineering in knowledge age
4. S. Singh et.al.  (2005)  Performance improvement of journal bearing: a case study PMGQ2005, Page469-471
5. Sandeep Singh et al. (2010) Tribological Behaviour of Fluorocarbon Coatings under Varying Sodium Exposure Level, in Surface Modification Technologies XXIII:  Editors- T S Sudarshan, U K Mudali and Baldev Raj, ISBN 9788191057102,  Valar Documents https://books.google.co.in/books?id=hnRoMwEACAAJ
6. Sandeep Singh et al. (2010) On suitability of Molycote as Coating Material on Silicone Rubber for Dynamic Seals, in Surface Modification Technologies XXIII:  Editors- T S Sudarshan, U K Mudali and Baldev Raj, ISBN 9788191057102,  Valar Documents https://books.google.co.in/books?id=hnRoMwEACAAJ
7. Sandeep Singh and Utpal Borah (2014) Some results of Pin on Disc Tribological Evaluation of 316LN stainless steel, in Aspects of Mechanical Engineering and Technology for Industry (AMETI -2014), NERIST, A.P. Dec 6-6, 2014, ISBN 9789383842957
8. Sandeep Singh and Radak Blange (2015) A critical comparison of regression based and FFT based signal Processing for Identification of full spectrum of quadrature signal for rotor dynamics application, National conference on computing, communication and information processing (NCCCIP-2015) ISBN: 978-93-84935-27-6
9. Sandeep Singh, Pradip Lingfa, Aditya Sinha, Sushmita Devi, Th. Siddhartha Singh, Utkars Anand (2017). “Tribological Characterization of Some oils used in fabrication of bio diesel”. National Conference on Environmental Pollution in Context to the Growing Industries, proceedings published by IJRETS (ISSN 2454-1915). vol.VII, special issue, PP.6 pages, Jan 2017.

List of Book Chapters

1. Sandeep Singh and Rajiv Tiwari (2016) Finite element model based crack force identification in a rotor system integrated with active magnetic bearing, VIRM 11 – Vibrations in Rotating Machinery. London : Institution of Mechanical Engineers, 2016. ISBN 978-0-9572374-8-3
2. Nabam Teyi and Sandeep Singh (2019)  Handling Phase Ambiguity in Full Spectrum from FFT,  in  Advances in Material Sciences and Engineering, Eds. Awang, Mokhtar, Emamian, Seyed Sattar, Yusof, Farazila, Springer, ISBN 978-981-13-8297-0, https://doi.org/10.1007/978-981-13-8297-0_54
3. Hemanta Doley, Sandeep Singh and Nabam Teyi  (2019) Design and Development of Apparatus for Evaluating Galling Resistance and Test,  in  Advances in Material Sciences and Engineering,Eds. Awang, Mokhtar, Emamian, Seyed Sattar, Yusof, Farazila, Springer, ISBN 978-981-13-8297-0,  https://doi.org/10.1007/978-981-13-8297-0_56