Department of Mechanical Engineering

DEPARTMENTS

Engineering

Science

CENTRE

Dr. Satyam Shivam Gautam

Professor

Machine Design, Tribology of Bearings, Materials

Contact
(EPBX/Office):0360-2257401-8 (Extn.) 6245
PROFESSIONAL BACKGROUND
From(Date of Joining)ToDesignationOrganisationNature of Association
03.08.2006 29.12.2014Assistant ProfessorNERISTRegular
30.12.2014 29.12.2017Associate ProfessorNERISTRegular
30.12.2017Till DateProfessorNERISTRegular
HONORS AND AWARDS
AwardInstituteYear
Senior Research FellowshipIT BHU2002-2006
EDUCATIONAL QUALIFICATION
DegreeSubjectUniversityYear
M. TechMachine DesignIIT BHU (Formerly IT BHU)2002
Ph.DTribologyIIT BHU (Formerly IT BHU)2006
ADMINISTRATIVE BACKGROUND
FromToDesignationOrganisation
August 2006August 2008Hostel Warden (Administrative)NERIST
July 2015August 2016Chairman (HMC) & Chief Warden (Hostels)NERIST
August 2017October 2021Member, Central Time Table CommitteeNERIST
July 2017April 2024Vice Chairman (Security)NERIST
October 2022ContinueMember, Academic CouncilNERIST
January 2024ContinueMember, Students Grievance CommitteeNERIST
October 2014May 2021Laboratory In-charge, Dynamics Lab. ME Dept.NERIST
October 2014May 2021Laboratory In-charge, Tribology Lab. ME Dept.NERIST
August 2017August 2020Member, Board of Studies, Mech. Engg. Dept.NERIST
May 2021April 2024Co-ordinator, Teaching Load Committee, ME Dept.NERIST
May 2021April 2024Member, Purchase Committee, ME Dept.NERIST
August 2020April 2024Convener,  Board of Studies, Mech. Engg. Dept.NERIST
August 2021ContinueLab. In-charge, Strength of Materials Lab. ME Dept.NERIST
MEMBERSHIPS IN PROFESSIONAL BODIES
  1. Life Member of The Indian Society of Technical Education (ISTE)
  2. Life Member for Tribology Society of India (TSI).
  3. Member of International Association of Engineers (IAENG)
  4. Life Member of Association of Mechanisms and Machines (AMM)
  5. Member of The Institution of Engineers (India)
  6. Member of ASME (2017 - 2018)
TEACHING ENGAGEMENTS
TitleCourse CodeModuleSemester
Engg. Drawing & GraphicsES 21151DegreeI
Technical MechanicsES 22100DegreeII
Strength of MaterialsME 22203DegreeII
Theory of MachinesME 22204DegreeII
Design of Machine ElementsME 23104DegreeI
Principles of TribologyME 24022DegreeII
M. TECH. THESIS SUPERVISED
Title of ProjectNames of Students
Stability analysis of wave bearing in turbulent regime considering micropolar fluid.Mr. Rolin Sorum
Stability analysis of journal bearing for turbulent couple stress.Mr. Rinchin Tashi
Preparation, microstructure and tribological properties of strontium bismuth titanate borosilicate doped with CeO2.Mr. C. W. Manpoong
Synthesis and mechanical properties of hydroxyapatite bio ceramics.Mr. M. Matin
Characteristics of tapered hydrodynamic short journal bearing with fluid inertia.Mr. R. Novin
Steady state characteristics of tapered hydrodynamic finite journal bearingwith fluid inertia   effect.Mr. P. Robin
PH.DS SUPERVISING
TopicScholar NameStatus of PHDRegistration Year
Study of hydrostatic / hybrid conical journal bearing with micropolar lubricantMr. N. K. RanaAwarded in 20172011
Characterizations of lead calcium titanate borosilicate glass and glass ceramicsMs. Sangeeta DasAwarded in 20192015
Dynamic analysis of sandwich beams with composite skins and different coresMr. Raj Kishor DasSubmitted in 20242018
Investigation of mechanical and wear properties of alumina and silica based epoxy nanocompositeMr. Rajib BhowmikContinuing2020
PARTICIPATION IN SHORT TERM COURSES
Course NameSponsored ByDate
Fundamentals of Tribology and Materials for Tribological Applications.AICTE27 Feb.- 11 Mar., 2006
Rotors Supported on Hydrodynamic Bearings.AICTE6 – 10 Dec., 2010
Recent Advances in Mechanics and their Application in Nano Engineering and Technology.AICTE1 – 12 Aug., 2011
CAD Using CATIAAICTE18 -22 Feb. 2013
Micromanufacturing for biomedical applicationsAICTE27 - 27 Feb. 2015
Materials tribology: Fundamentals and recent advancesAICTE23 - 29 Mar. 2017
Computation and optimization in engineering with MATLABAICTE18 - 29 Dec. 2017
Electron microscopy and microanalysis of materialsAICTE12 - 17 Feb. 2018
Computer Aided Design with AnsysAICTE04 - 08 Mar. 2019
COURSES OR CONFERENCES ORGANISED
Conference NameSponsored ByDate
Recent Advances in Tribology and Materials for Tribological ApplicationsTEQIP10 - 14th April 2013
National Conference on Recent Advancements in Mechanical EngineeringTEQIP + NABARD8th & 9th Nov. 2013
International Symposium on Aspects of Mechanical Engineering and Technology for IndustryTEQIP+NABARD+NHPC etc.6th - 8th Dec. 2014
BOOKS AUTHORED
  1. Recent Advancements in Mechanical Engineering, EXCEL Publishers, ISBN No. 9789382880714
  2. Aspects of Mechanical Engineering & Technology (Vol. I & II), EXCEL Publishers, ISBN No. 9789383842957 (Vol. I) & ISBN No. 9789383842964 (Vol. II)
PUBLICATIONS
  1. S. K. Singh, R. Kacker, S. S. Gautam, S. K. Tamang, A. Arora “Application of ANN methodology to optimize the criteria of performance evaluation with multiple v-cut twisted tape inserts,” Numerical Heat Transfer, Part B: Fundamentals (Taylor & Francis, SCI, 1.0 IF) 2024. (Accepted) (ISSN: 1521 – 0626)
  2. S. K. Singh, R. Kacker, S. S. Gautam, S. Tandon, “Correlations on heat transfer rate and friction factor using radial and axial v-cut geometry on a twisted tape in a double pipe heat exchanger,” Journal of Process Mechanical Engineering (Part E), IMechE (SAGE, SCI, 2.4 IF), 2024, (Accepted) (ISSN: 2041 – 3009)
  3. S. K. Singh, R. Kacker, S. S. Gautam, S. K. Tamang, “Multi objective optimization of thermo-hydraulic behavior of heat exchanger with v-cut twisted tape in axial and radial direction using NSGA II,” Energy Sources, Part A: Recovery, Utilization, and Environmental Effects (Taylor & Francis, SCI, 2.9 IF), 2023, Vol. 45, 4, pp. 13057– 13076.  (DOI: 10.1080/15567036.2023.2278723) (ISSN: 1556 – 7230)
  4. B. H. Maryam, D. K. Sinha, S. Kefyalew, S. S. Gautam, S. Kumar, S. Pande, “AZ31-Mg metal matirx composite in metallurgical and testing approaches,” Advances in Mechanical Engineering (SAGE, SCIE, 2.1 IF), 2023, Vol. 15, 7, 1 – 21 (DOI: 10.1177/16878132231184199) (ISSN: 1687 – 8140)
  5. S. K. Singh, R. Kacker, P. K. Chaurasiya, S. S. Gautam, “Correlations on heat transfer rate and friction factor of a rectangular toothed v-cut twisted tape exhibiting the combined effects of primary and secondary vortex flows,” International Communications in Heat and Mass Transfer (Elsevier, SCIE, 7.0 IF) 2022, Vol. 139, 106503 (DOI: 10.1016/j.icheatmasstransfer.2022.106503) (ISSN: 0735 – 1933)
  6. R. K. Das, B. Nayak, P. Ganeshan, S. S. Gautam, K. K. Mandal, “Dynamic mechanical behavior of a nano sized alumina fiber reinforced epoxy hybrid composites,” Materials Today: Proceedings (Elsevier, Scopus) 2022, Vol. 76, 3, 524 – 527. (DOI: 10.1016/j.matpr.2022.11.158) (ISSN: 2214 – 7853)
  7. R. K. Das, B. Nayak, S. S. Gautam, N. K. Rana, “Fabrication and characterization of GFRP composite skin material of sandwich structure,” Materials Today: Proceedings (Elsevier, Scopus), 2022, Vol. 76, 3, 569 – 572. (DOI: 10.1016/j.matpr.2022.11.165) (ISSN: 2214 – 7853)
  8. R. Bhowmik, S. Das, D. Mallick, S. S. Gautam, “Predicting the elastic properties of hemp fibre – A comparative study on different polymer composite,” Materials Today: Proceedings (Elsevier, Scopus), 2022, Vol. 50, 5, 2510 – 2514. (DOI: 10.1016/j.matpr.2021.09.562) (ISSN: 2214 – 7853)
  9. G. M. S. Ahmed, M. G. Perumall, J. Ramulu, B. Brehane, D. K. Sinha, S. S. Gautam, “Web buckling investigation of direct metal laser sintering based connecting rod with hexagonal perforations,” Advanced Manufacturing Processes (Book Chapter: CRC Taylor & Francis, Scopus) 2022, 51 – 78. (DOI: 10.1201/9781003220237) (ISBN: 978-1-003-22023-7)
  10. A. Leramo, D. K. Sinha, S. S. Gautam, “Modelling and optimization of process parameters with single point incremental forming of AA6061 using response surface method,” Advanced Manufacturing Processes (Book Chapter: CRC Taylor & Francis, Scopus) 2022, 129 – 146. (DOI: 10.1201/9781003220237) (ISBN: 978-1-003-22023-7)
  11. M. L. Besha, D. K. Sinha, C. Venkatesh, S. S. Gautam, “Analysis of effective stresses for titanium alloys in continuous forming process,” Materials Today: Proceedings (Elsevier, Scopus), 2022, Vol. 49, 2, 383 – 389. (DOI: 10.1016/j.matpr.2021.02.289) (ISSN: 2214 – 7853)
  12. Y. Solomon, D. K. Sinha, P. J. Ramulu, S. S. Gautam, “Numerical investigation of product capability and enhancement through multi-hole extrusion process,” Technology Innovation in Mechanical Engineering (Book Chapter: Springer Nature, Scopus), 2022, 791 – 802. (DOI: 10.1007/978-981-16-7909-4) (ISSN: 2195 – 4356)
  13. A. Gautam, C. R. Gautam, M. Mishra, S. Sahu, R. Nanda, B. Kisan, R. K. Gautam, R. Prakash, K. Sharma, D. Singh, S. S. Gautam, “Synthesis, structural, mechanical and biological properties of HAp-ZrO2-hBN bio-composites for bone regeneration applications,” Ceramics International (Elsevier, SCI, 5.2 IF), 2021. Vol. 47, 21, 30203 – 30220. (DOI: 10.1016/j.ceramint.2021.07.200) (ISSN: 0272 – 8842)
  14. R. D. Daba, D. K. Sinha, H. Beri, S. S. Gautam, G. M. S. Ahmed, R. S. Singh, “Mathematical modelling and optimization of parameters for Al-Si-Fe aluminum alloy reinforced by Al2O3 and graphite particles using Taguchi method,” Materials Today: Proceedings (Elsevier, Scopus), 2020, Vol. 44, 1, 979 – 986. (DOI: 10.1016/j.matpr.2020.11.071) (ISSN: 2214 – 7853)
  15. S. Das, A. Madheshiya, S. S. Gautam, D. Tripathi, C. R. Gautam, “Dielectric and impedance spectroscopic characteristics of lead calcium titanate borosilicate glass ceramics,” Glass Physics and Chemistry (Springer, SCI, 0.7 IF), 2020, Vol. 46, 6, 514 – 525. (DOI: 10.1134/S108765962101003X) (ISSN: 1087 – 6596)
  16. S. Das, A. Madheshiya, S. Das, S. S. Gautam, C. R. Gautam, “Mechanical, surface morphological and multi-objective optimization of tribological properties of V2O5 doped lead calcium titanate borosilicate glass ceramics,” Ceramics International (Elsevier, SCI, 5.2 IF), 2020, Vol. 46, 19170 – 19180. (DOI: 10.1016/j. ceramint.2020.04.252) (ISSN: 0272 – 8842)
  17. S. Das, S. Das, S. S. Gautam, C. R. Gautam, “Optimization of wear coefficient and coefficient of friction of borosilicate glass ceramics using Taguchi coupled grey fuzzy logic technique,” Materials Today: Proceedings (Elsevier, Scopus), 2020, Vol. 27, 2, 1579 – 1589. (DOI: 10.1016/j.matpr.2020.03.262) (ISSN: 2214 – 7853)
  18. S. Das, S. S. Gautam, C. R. Gautam, “Electrical study of lead calcium titanate borosilicate glass ceramics,” Advances in Lightweight Materials and Structures (Book Chapter: Springer Nature, Scopus), 2020, 361 – 370. (DOI: 10.1007/978-981-15-7827-4) (ISSN: 2662 – 3161) Editors: A. Praveen Kumar, P. Vamsi Krishna, Tatacipta Dirgantara
  19. N. K. Rana, S. S. Gautam, S. Verma, “Stiffness and damping characteristics of conical multirecess hybrid journal bearing for different load arrangements,” Journal of SN Applied Sciences (Springer Nature, Scopus), 2019, 1:604. (DOI: 10.1007/s42452-019-0609-y) (ISSN: 2523 – 3971)
  20. S. Das, A. Madheshiya, S. S. Gautam, C. R. Gautam, D. Tripathy, “Electrical characteristics of PbO-CaO-TiO2-SiO2-B2O3 glass ceramics doped with germanium,” Journal of Materials Science: Materials in Electronics (Springer, SCI, 2.8 IF), 2019, Vol. 30, 3, 2431 – 2441. (DOI: 10.1007/s10854-018-0516-9) (ISSN: 1573 – 482X)
  21. S. Das, A. Madheshiya, M. Ghosh, K. K. Dey, S. S. Gautam, J. Singh, R. Mishra, C. R. Gautam, “Structural, optical, and nuclear magnetic resonance studies of V2O5 doped lead calcium titanate borosilicate glasses,” Journal of Physics and Chemistry of Solids (Elsevier, SCI, 4.0 IF), 2019, Vol. 126, 17 – 26. (DOI: 10.1016/j.jpcs.2018.10.030) (ISSN: 0022 – 3697)
  22. B. Nayak, R. K. Das, S. S. Gautam, “Vibration performances of MRE embedded sandwich beam: experimental study,” Vibroengineering Procedia (Scopus), 2018, Vol. 21, 20 – 25. (DOI: 10.21595/vp.2018.20383) (ISSN: 2538 – 8479)
  23. S. Das, S. S. Gautam, C. R. Gautam, “Mechanical and tribological characterization of lead calcium titanate borosilicate glass ceramic doped with ferric oxide,” Materials Today: Proceedings (Elsevier, Scopus), 2018, Vol. 5, 17746 – 17752. (DOI: 10.1016/j.matpr.2018.06.098) (ISSN: 2214 – 7853)
  24. S. Das, C. W. Manpoong, S. S. Gautam, A. Madheshiya, C. R. Gautam, “Tribological study of strontium bismuth titanate borosilicate glass ceramics,” Materials Today: Proceedings (Elsevier, Scopus), 2018, Vol. 5, 20306 – 20313. (DOI: 10.1016/j.matpr.2018.06.403) (ISSN: 2214 – 7853)
  25. S. Das, S. S. Gautam, C. R. Gautam, A. Madheshiya, U. S. Dixit, “Parametric optimization of dry sliding wear and friction of germanium doped lead calcium titanate borosilicate glass ceramic,” Ceramics International (Elsevier, SCI, 5.2 IF), 2018, Vol. 44, 6541 – 6550. (DOI: 10. 1016/j.ceramint.2018.01.056) (ISSN: 0272 – 8842)
  26. C. R. Gautam, S. Das, S. S. Gautam, A. Madheshiya, A. K. Singh, “Processing and optical characterizations of lead calcium titanate borosilicate glass doped with germanium, Journal of Physics and Chemistry of Solids (Elsevier, SCI, 4.0 IF), 2018, Vol. 115, 180 – 186. (DOI: 10.1016/j.jpcs.2017.12.038) (ISSN: 0022 – 3697)
  27. S. Das, A. Madheshiya, S. S. Gautam, C. R. Gautam, “Fabrication and optical characterizations of lead calcium titanate borosilicate glasses doped with ferric oxide,” Journal of Non-Crystalline Solids (Elsevier, SCI, 3.5 IF), 2017, Vol. 478, 16 – 22. (DOI: 10.1016/j.jnoncrysol.2017.10.004) (ISSN: 0022 – 3093)
  28. N. K. Rana, S. S. Gautam, S. Verma, F. Rahmani, “On the stiffness and damping coefficients of constant flow valve compensated conical hydrostatic journal bearing with micropolar lubrication,” Procedia Technology (Elsevier, Scopus), 2016, Vol.  23, 42 – 50. (DOI: 10.1016/j.protcy.2016.03.074) (ISSN: 2212 – 0173)
  29. C. R. Gautam, C. W. Manpoong, S. S. Gautam, A. K. Singh, A. Madhesiya and M. Tamuk,“Synthesis, microstructure and dielectric properties of (Sr,Bi)TiO3 borosilicate glass ceramics,” Journal of Ceramic Science and Technology (SCIE, 1.22 IF), 2016, Vol. 7, 1, 79 – 86. (DOI: 10.4416/JCST2015-00035) (ISSN: 2190 – 9385)
  30. C. R. Gautam, M. Tamuk, C. W. Manpoong, S. S. Gautam, S. Kumar, A. Kumar, V. Kumar, “Microwave synthesis of hydroxyapatite bioceramic and tribological studies of its composites with SrCO3 and ZrO2,” Journal of Materials Science (Springer, SCI, 4.5 IF), 2016, Vol. 51, 10, 4973 – 4983. (DOI: 10.1007/s10853-016-9802-1) (ISSN: 1573 – 4803)
  31. N. K. Rana, S. S. Gautam, S. Verma, “Comparative study on the effect of recesses on conical hybrid journal bearing compensated with CFV under micropolar lubrication,” Tribology Online (Scopus, 1.0 IF), 2016, Vol. 11, 3, 474 – 486. (DOI: 10.2474/trol.11.474) (ISSN: 1881 – 2198)
  32. N. K. Rana, S. S. Gautam, S. Verma, “Performance characteristics of constant flow valve compensated conical multirecess hybrid journal bearing under micropolar lubrication,” International Journal of Design Engineering (Inderscience), 2016, Vol. 6, 3, 218 – 236. (DOI: 10.1504/IJDE.2016.079030) (ISSN: 1751 – 5882)
  33. N. K. Rana, S. S. Gautam, S. Verma, “Performance of conical hybrid bearing with micropolar lubricant considering aspect ratio variations,” International Journal of Applied Engineering Research (Scopus), 2015, Vol. 10, 54, 62 – 70. (ISSN: 0973 – 9769) (Special Issue)
  34. R. Tashi, S. S. Gautam, S. Samanta, “Stability analysis of journal bearings in couple stress lubrication considering turbulent flow,” International Journal of Applied Engineering Research (Scopus), 2015, Vol. 10, 54, 1 – 5. (ISSN: 0973 – 9769) (Special Issue)
  35. N. K. Rana, S. S. Gautam, S. Verma, “Static characteristics of conical hydrostatic journal bearing under micropolar lubrication,” Journal of the Institution of Engineers (Series C) (Springer, Scopus), 2014, Vol. 95, 4, 375 – 381. (DOI: 10.1007/s40032-014-0148-7) (ISSN: 2250 – 0553)
  36. N. K. Rana, S. S. Gautam, S. Samanta, “Approximate analysis of dynamic characteristics of short journal bearings in turbulent micropolar lubrication,” Journal of the Institution of Engineers (Series C) (Springer, Scopus), 2014, Vol. 95, 4, 383 – 388. (DOI: 10.1007/s40032-014-0148-8) (ISSN: 2250 – 0553)