Department of Mechanical Engineering

1. Member of IE(I) Kolkatta (M-138472-9)
2. Lifer member of Welding Society of India (WSI)   (L-01159)
3. Life member of ISTE

BOOK CHAPTER

1. Book titled ‘Laser based Additive manufacturing; State –of-Art, Heat Transfer Analysis and Capabilites” Authored by Sohini Choudhury, Yadaiah Nirsanametla and M.Chandrasekaran, Lambert Academic Publishing, Germany.
2. M.Chandrasekaran, M.Muralidhar, C.M.Krishna and U.S.Dixit, Online Machining Optimization with Continuous Learning. In: Davim JP (Ed) Computational Methods for Optimization Manufacturing Technology, IGI Global, Hershey, 2012.
3. Lata K., Chandrasekaran M., Tamang S.K., Ramesh R., Rana N.K., GMAW Investigation of AISI 201 Stainless Steel and Industry Need Optimization Using Genetic Algorithm” In: Narayanan R., Joshi S., Dixit U. (Eds) Advances in Computational Methods in Manufacturing. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore, 2019.
4. Singh V, Chandrasekaran M, Samanta S. Investigation of Weld Bead Characteristics and Optimization of GMAW of Nitrogen Strengthened Austenitic Stainless Steel (AISI 201Gr). In: Biswal B.B, Sarkar B.K, Mahanta P (Ed) Advances in Mechanical Engineering 2020 (pp. 333-346). Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-15-0124-1_30
5. Singh V, Chandrasekaran M, Samanta S. Investigation on Weld Bead Geometry of AISI 201LN in GMAW-Cold Metal Transfer (CMT) Process. In: Li L, Pratihar  D.K, Chakrabarty S, Mishra P.C (Ed) Advances in Materials and Manufacturing Engineering 2020 (pp. 379-386). Lecture Notes in Mechanical Engineering. Springer, Singapore.https://doi.org/10.1007/978-981-15-1307-7_42
6. B. Choudhury, M. Chandrasekaran.Gas tungsten arc welding of Inconel 825 sheet: Study on weld bead geometry and GA optimization. In: Li L., Pratihar D., Chakrabarty S., Mishra P. (Eds) Advances in Materials and Manufacturing Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore, 2020. https://doi.org/10.1007/978-981-15-1307-7_46
7. Devarasiddappa, D., Chandrasekaran, M.  “PCA-GRA Integrated Multi Response Optimization of Wire-Cut EDM of Ti-6Al-4V Alloy for Sustainable Production” In: Biswal B.B., Sarkar B.K., Mahanta P. (Eds.)Advances in Mechanical Engineering. Lecture Notes in Mechanical Engineering, Springer, Singapore, 2020. pp. 257-269. DOI: 10.1007/978-981-15-0124-1-24

JOURNLAS

1. Borah, Jyotisman, M. Chandrasekaran, and L. Selvarajan. "Taguchi-Based Experimental Investigation and Modeling of 3D-Printed PEEK Parts as Biomedical Implants using Fused Deposition Modeling for Improving Mechanical Strength and Surface Quality." Journal of Materials Engineering and Performance (2023): 1-13.
2. Dhrubajit Sarma^, M. Chandrasekaran, Radak Blange  and A.K.Sahoo Energy studies in MQL machining environment, presented in 3^rd International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2023) November 20-23, 2023, Dubai, UAE
3. Dhrubajit Sarma^, M. Chandrasekaran, A.K.Singh and A.K.Sahoo Energy efficient machining of aerospace alloys, presented in 3^rd International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2023) November 20-23, 2023, Dubai, UAE
4. Jyotisman Borah¹ and M. Chandrasekaran Experimental investigation and optimization of 3D printing parameters for printing PEEK bio-implants, presented in 3^rd International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2023) November 20-23, 2023, Dubai, UAE
5. Dhrubajit Sarma, Gautam Roy, M. Chandrasekaran, Rupshree Ozah and R. Ramesh, Machinability study on Ti-6Al-4V alloy in MQL environment:Conventional Vs Wiper tool, presented in 3^rd International Conference on Recent Advances in Materials & Manufacturing Technologies (IMMT 2023) November 20-23, 2023, Dubai, UAE
6. Singh, V., Chandrasekaran, M., Devarasiddappa, D., Choudhury, B. Experimental Investigation and Optimization to Maximize Ultimate Tensile Strength and Elongation of Weld Joint During GMAW of AISI 201LN. In: Ramesh Babu, N., Kumar, S., Thyla, P.R., Sripriyan, K. (Eds) Advances in Additive Manufacturing and Metal Joining. Lecture Notes in Mechanical Engineering. Springer, Singapore. (2023) https://doi.org/10.1007/978-981-19-7612-4_27
7. Choudhury, B., Chandrasekaran, M., Singh, V., Ramesh, R. Optimization of Weld Parameters on Bead Characteristics During EBW of Inconel 825. In: Ramesh Babu, N., Kumar, S., Thyla, P.R., Sripriyan, K. (eds) Advances in Additive Manufacturing and Metal Joining. Lecture Notes in Mechanical Engineering. Springer, Singapore. (2023)  https://doi.org/10.1007/978-981-19-7612-4_32

8. Bishub Choudhury, Vivek Singh, Ajay Pratap Singh, M. Chandrasekaran, Yamika Patel and Shailesh Kumar Singh, Simultaneous optimization of weld bead geometry and weld strength during gas tungsten arc welding of Inconel 825 strips using desirability function coupled with grey relational analysis (DF-GRA) Engineering Research Express, Volume 5, Number 1, (2023)

9. Bishub Choudhury and Muthumari Chandrasekaran, Hybrid optimization strategy for evaluating sustainable performance of the electron beam welding process, Optik Volume 275, (2023) Volume 275, March 2023, 170512; https://doi.org/10.1016/j.ijleo.2023.170512
10. Choudhury, B., Chandrasekaran, M. Electron Beam Welding Investigation of Inconel 825 and Optimize Energy Consumption Using Integrated Fuzzy Logic-Particle Swarm Optimization  Approach. Int. J. Fuzzy Syst. 25, 1377–1399 (2023). https://doi.org/10.1007/s40815-022-01431-8
11. L. Selvarajan, K. Venkataramanan, Bishub Choudhury & M. Chandrasekaran (2023) Evaluating of surface morphology on EDD machining parameters for Si3N4-TiN using TLBO-MRA, Materials and Manufacturing Processes, (2023) In Press. DOI: 10.1080/10426914.2023.2219307
12. Selvarajan, L., Venkataramanan, K., Choudhury, B., & Chandrasekaran, M. (2023). Evaluating of surface morphology on EDD machining parameters for Si3N4-TiN using TLBO-MRA. Materials and Manufacturing Processes, 1-15.
13. Ahamed, M. S., Lingfa, P., & Chandrasekaran, M. (2023). Identification of Suitable Catalyst for the Production of Biodiesel from Livistona Jenkinsiana. In Renewable Resources and Energy Management (pp. 154-160). CRC Press.
14. Evaluation of tensile strength of 3D printed PLA component and Taguchi optimization Jyotisman Borah and M. Chandrasekaran Neuro Quantology | Jul 2022 | Volume 20 | Issue 7 | Page 1714-1726 | (2022) doi: 10.14704/nq.2022.20.7.NQ33215

15. Akash Deep, Vivek Singh, Som Ashutosh, M Chandrasekaran and Dixit Patel, Performance of weld bead profile during A-TIG welding on nitrogen alloyed stainless steel Engineering Research Express, Volume 3, Number 4, 2021.

16. Choudhury, B., Chandrasekaran, M. Microstructural Investigation and Integrated Optimization of Weld Bead Characteristics in Electron Beam Welding of Inconel 825. Trans Indian Inst Met 74, 2681–2701 (2021). https://doi.org/10.1007/s12666-021-02343-1
17. Thirumalai, Kuaanan Techato, M. Chandrasekaran, K.Venkatapath, M.Seenivasan, Experimental investigation during turning process of titanium material for surface roughness R. Volume 45, Part 2, 2021, Pages 1423-1426 https://doi.org/10.1016/j.matpr.2020.07.213
18. Devarasiddappa, D.; Chandrasekaran, M. (2020) Experimental investigation and optimization of sustainable performance measures during WEDM of Ti6Al4V alloy using preference based TLBO algorithm. Materials and Manufacturing Processes. 35 (11), 1204–1213.DOI: 10.1080/10426914.2020.1762211
19. Devarasiddappa, D.; Chandrasekaran, M; Arunachalam, R. (2020) Experimental investigation and parametric optimization for minimizing surface roughness during WEDM of Ti6Al4V alloy using modified TLBO algorithm. Journal of the Brazilian Society of Mechanical Sciences and Engineering,42(3), 128-145.DOI: 10.1007/s40430-020-2224-7
20. BishubChoudhury,  M. Chandrasekaran, D. Devarasiddappa, (2020) Development of ANN modeling for estimation of weld strengthand integrated optimization for GTAW of Inconel 825 sheets usedin aero engine components. Journal of the Brazilian Society of Mechanical Sciences and Engineering.42:308.https://doi.org/10.1007/s40430-020-02390-7
21. BishubChoudhury and M. Chandrasekaran. (2020) Electron beam welding of aerospace alloy (Inconel 825): Acomparative study of RSM and ANN modeling to predict weld bead area. Optik - International Journal for Light and Electron Optics, 219:165206.https://doi.org/10.1016/j.ijleo.2020.165206
22. Devarasiddappa, D.; Chandrasekaran, M. (2020) Estimation of power consumption and optimization using TLBO algorithm for sustainable WEDM of Ti-6Al-4V alloy. Journal of the Institution of Engineers (India): Series C. 101(2), 257-270. DOI: 10.1007/s40032-020-00560-z
23. Sweety Mahanta, M. Chandrasekaran, Sutanu Samanta (2020) New Emerging Al7075 Based Hybrid Nanocomposite for Automotive Applications: A Sustainability Approach. Key Engineering Materials, Vol. 856, pp. 29-35.
24. Sweety Mahanta, M. Chandrasekaran, Sutanu Samanta, M. Thirugnanasambandam (2019) Towards greener machining: A review of power saving in EDM of AMC for sustainability. IJEP, 39(8): 763-769
25. Shubhajit Das, S.K. Tamang, M. Chandrasekaran, S. Samanta (2019), “Experimental Investigation, Modeling and Optimization of Tribological Parameters of AA6061/SiC/B4C Hybrid Nano Composites” Key Engineering Materials, Vol. 801, pp 83-88 doi:10.4028/www.scientific.net/KEM.801.83
26. Sweety Mahanta,  M. Chandrasekaran, SutanuSamanta (2019), “RSM Modeling and Taguchi Analysis of EDM of B4C and Flyash Reinforced Hybrid Nano composites” Key Engineering Materials, Vol. 801, pp 227-232,  doi:10.4028/www.scientific.net/KEM.801.227
27. Devarasiddappa, D.; Chandrasekaran, M. (2019) Fuzzy Logic Integrated PSO Methodology for Parameters Optimization in End Milling of Al/SiCp MMC. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(5). DOI: 10.1007/s40430-019-1725-8
28. Sweety Mahanta, M. Chandrasekaran, SutanuSamanta, R. M. Arunachalam “Multi-response ANN Modelling and Analysis on Sliding Wear behavior of Al7075/B4C/fly ash Hybrid Nanocomposites” Materials Research Express (2019) 6 0850h4, doi.org/10.1088/2053-1591/ab28d8.
29. S.K. Tamang, M. Chandrasekaran, K. Palanikumar and R. Arunachalam (2019) "Machining performance optimization of -825 superalloy using GA for industrial applications". International Journal of Machining and  MQL− assisted turning of InconelMachinability of Materials. Vol. 21, Nos. 1/2, pp 43-65.
30. Devarasiddappa, D.; Chandrasekaran, M. (2018) Evaluation of power consumption and MRR in WEDM of Ti–6Al–4V alloy and its simultaneous optimization for sustainable production. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 400, 1-18. DOI: 10.1007/s40430-018-1318-y
31. G. Gangmei, M. Chawang, M., S. K. Tamang, M. Chandrasekaran (2018),  "Fuzzy set based optimization for Grinding Al/SiC MMC; an approach to maximize MRR satisfying desired surface roughness", Int. J. Modern Manuf. Technol.,  Vol. 10(1), pp.43–49.(Scopus) (UGC Journal No: 23176)
32. D. Devarasiddappa, M. Chandrasekaran and M.T. Sambandam “Multi Performance Optimization in Wire cut EDM of Inconel 825 using Desirability Function coupled with Analytical Hierarchy Process”, Materials Today: Proceedings 5 (2018) pp. 11531-11547
33. Shubhajit Das, M. Chandrasekaran, S. Samanta, K. Palanikumar, J. Paul Davim (2018) “Fabrication and tribological study of AA6061 hybrid metal matrix composites reinforced with SiC/B₄C nanoparticles”, Industrial Lubrication and Tribology.Vol 71, Issue 1.
34. S. K. Tamang, M. Chandrasekaran, A. K. Sahoo (2018) "Sustainable machining: an experimental investigation and optimization of machining Inconel 82with dry and MQL approach". J Braz. Soc. Mech. Sci. Eng., DOI: 10.1007/s40430-018-1294-2. 5
35. D. Devarasiddappa, M. Chandrasekaran (2018) "Evaluation of power consumption and MRR in WEDM of Ti–6Al–4V alloy and its simultaneous optimization for sustainable production". J Braz. Soc. Mech. Sci. Eng., DOI: https://doi.org/10.1007/s40430-018-1318-y.
36. SweetyMahanta,  M. Chandrasekaran, SutanuSamanta, R. M. Arunachalam (2018), “EDM investigation of Al 7075 alloy reinforced with B4C and fly ash nanoparticles and parametric optimization for sustainable production” J Braz. Soc. Mech. Sci. Eng., Vol. 40, pp. 263.
37. K. M. Senthil Kumar, R. Thirumalai , J.S. Senthilkumaar and M. Chandrasekaran, (2018), “Experimental investigation of process parameters during environmental friendly turning process”, Eco. Env. & Cons., Vol. 24, pp. 431-436.
38. D. Devarasiddappa, M. Chandrasekaran and M.T. Sambandam (2018) “Multi Performance Optimization in Wire cut EDM of Inconel 825 using Desirability Function coupled with Analytical Hierarchy Process”, Materials Today: proceedings, Volume 5, Issue 5, Part 2, pp. 11531-11547.
39. BishubChoudhury and M. Chandrasekaran (2017)  “Study on Gas Tungsten Arc Welding Characteristics of Nickel based Aerospace Alloys” Materials Today: Proceedings, Vol. 5,  pp. 7337-7345.
40. Shubhajit Das, S. K. LalmuanVaiphei, M. Chandrasekaran, S. Samanta (2017), “Wire cut EDM of Al6061 Hybrid Nano Composites: Experimental Investigations and RSM modeling of Surface Roughness”, Materials Today: Proceedings. Vol. 5,  pp. 8206-8215.
41. SweetyMahanta, M. Chandrasekaran, SutanuSamanta (2017) "GA based Optimization for the Production of Quality Jobs with Minimum Power Consumption in EDM of Hybrid MMCs", Materials Today: Proceedings, Vol. 5, pp. 7788-7796.
42. S. K. Tamang, N. Natarajan, M. Chandrasekaran (2017) "Optimization of EDM process in machining micro holes for improvement of hole quality" J Braz. Soc. Mech. Sci. Eng., Vol. 39, pp. 1277–1287.
43. S. K. Tamang and M. Chandrasekaran (2017) "Integrated optimization methodology for intelligent machining of inconel 825 and its shop‑floor application" J Braz. Soc. Mech. Sci. Eng., Vol. 39, pp. 865–877.
44. S. K. Lalmuana, Shubhajit Das, M. Chandrasekaran, SantoshK.Tamang (2017) "Machining Investigation on Hybrid Metal Matrix Composites − A Review" Materials Today: Proceedings, Vol. 4,  pp. 8167–8175.
45. BishubChoudhury and M. Chandrasekaran (2017) “Investigation on welding characteristics of aerospace materials – A review” Materials Today: Proceedings, Vol. 4,  pp. 7519-7526.
46. S. K. Tamang and M. Chandrasekaran (2017), "Integrated optimization methodology for intelligent machining of Inconel 825 and its shop‑floor application", J Braz. Soc. Mech. Sci. Eng., Vol. 39, pp. 865–877.
47. M. Chandrasekaran, S. K. Tamang (2017), “ANN–PSO Integrated Optimization Methodology for Intelligent Control of MMC Machining”,  J. Inst. Eng. India Ser. C., Vol. 98 (4), pp 395–401.
48. M. Chandrasekaran, Jees George,  R. M. Arunachalam & NabamTeyi, "Multi-objective parametric optimization for non-conventional machining of Inconel 825 − for an industrial application", Journal of Scientific & Industrial Research, Vol. 76, May 2017, pp. 324-319
49. Tamang, S. K., & Chandrasekaran, M. (2015). Modeling and optimization of parameters for minimizing surface roughness and tool wear in turning Al/SiCp MMC, using conventional and soft computing techniques. Advances in Production Engineering & Management.  Vol.10(2), pp. 59–72   doi:10.14743/apem2015.2.192.  
50. Shiv Sharma, M.Chandrasekaran and R.Thirumali, “Application of Taguchi desirability Function Analysis (TDFA) for optimizing multiple responses in turning Inconel 718’, Manufacturing Technology Today (MTT),  Vol. 13, No.6, 2014, pp. 20–29 (ISSN: 0972-7396)
51. Shiv S.; Tamang, S.; Devarasiddappa, D.; Chandrasekaran, M.“Fuzzy Logic Modeling and Multiple Performance Optimization in Turning GFRP Composites using Desirability Function Analysis” Procedia Materials Science (Elsevier), Vol. 6, 2014, 1805-1814. DOI: 10.1016/j.mspro.2014.07.211
52. Shiv Sharma, M.Chandrasekaran and R.Thirumalai, “Multi-objective optimization of surface roughness and tool wear in turning Inconel 718: A desirability analysis, genetic algorithm and firefly algorithm”, Applied Mechanics and Materials, Vols. 592-594 (2014) pp 545-549.
53. SantoshTamang and M. Chandrasekaran, “Desirability fuzzy approach for optimizing multiple performance characteristics in machining metal matrix composites” Applied Mechanics and Materials, Vols. 592-594 (2014) pp 128-133.
54. M. Chandrasekaran and D.Devarasiddappa, “Artificial neural network modeling for surface roughness prediction in cylindrical grinding of Al‐SiCp metal matrix composites and ANOVA analysis”, Advances in Production Engineering & Management, Vol 9 No 2 ,  June 2014, pp 59–70.
55. M.Chandrasekaran, M.Muralidhar and U.S.Dixit, Online optimization of a finish turning process: Strategy and experimental validation, Int J Adv Manuf Technol (2014) 75:783–791.
56. SantoshTamang and M Chandrasekaran, “Multi response optimization of surface roughness and tool wear in turning al/sic particulate metal matrix composites using Taguchi Grey Relational Analysis”, Manufacturing Technology (MTT), April 2013, pp. 14–21. (ISSN: 0972-7396)
57. SantoshTamang and M.Chandrasekaran, (2013) “Experimental Investigation and development of multi response ANN modeling in Turning Al-SiCp MMC using Polycrystalline diamond tool”, International Journal of Current Engineering and Technology (ISSN 2277 – 4106).
58. Thingujam Jackson Singh, S. Samanta, M. Chandrasekaran, “Modeling of Ultrasonic Imaging of an Impacted Composite Domain Using the Artificial Neural Network and its Evaluation” Int. Jr of Mechatronics and Intelligent Manufacturing (IJMIM), Vol 2., No 3–4, 2013
59. M.Chandrasekaran, M.Muralidhar and U.S.Dixit, Online optimization of multipass machining based on cloud computing, Int. Jr of Adv. Manuf Techno (IJAMT), 65(1–4), pp. 239–250, 2013.
60. Devarasiddappa, D.; Chandrasekaran, M.; Amitava, M. (2012) Artificial Neural Network Modeling for Predicting Surface Roughness in End Milling of Al-SiCp Metal Matrix Composites and Its Evaluation, Journal of Applied Sciences, 12(10),955-962.DOI: 10.3923/jas.2012.955.962
61. Chandrasekaran, M.;and Devarasiddappa D. (2012) Development of Predictive Model for surface roughness in End Milling of Al-SiCp Metal Matrix Composites using Fuzzy Logic, World Academy of Science, Engineering and Technology, International Journal of Mechanical and Mechatronics Engineering, 6 (7), 1292-1297.DOI: 10.5281/zenodo.1080135
62. Anjan Kumar Kakati, M. Chandrasekaran, AmitavaMandal, and Amit Kumar Singh, “Prediction of Optimum Cutting Parameters to obtain Desired Surface in Finish Pass End Milling of Aluminium Alloy with Carbide Tool Using Artificial Neural Network”, World Academy of Science, Engineering and Technology, Vol. 81, 2011, pp 781–757.
63. M.Chandrasekaran, M.Muralidhar, U.S.Dixit “An Interactive Online Finish End Milling Process Optimization”, Int. Jr. Applied Engineering Research, Vol.6, No.5, 2011, pp. 949-959.(ISSN:1870-4069)
64. M.Chandrasekaran, S.Datta, P.P.Goswami, T.Saikia, C.M.Krishna, “ A Heuristic Approach for Optimal Selection Sequence to Minimize Drill – Air Time for Increased Productivity”, Int. Jr. Applied Engineering Research, Vol.6, No.5, 2011, pp. 939–948.(ISSN:1870-4069)
65. M.Chandrasekaran and Amit Kumar Singh “ Determination of Optimal Cutting   Condition for Desired Surface Finish in face Milling process Using Non-Conventional Computational Methods”,Journal of Research in Computer Science, Vol.54, 2011, pp 185–197 (ISSN:1870-4069).
66. MuthumariChandrasekaran, Amit Kumar Singh, ‘Determination of Optimal Cutting Condition for Desired Surface Finish in Face Milling Process Using Non-Conventional Computational Methods”, Advances in Soft Computing Algorithms, Vol. 54,  2011, pp 185–197 (ISSN 1870: 4089).
67. M.Chandrasekaran, Amresh Kumar, Rajeev Kumar Gupta, Gauri Shankar, O.P.Ray, Narendra Kumar Rana,” Design of PLC controlled Pneumatic operated box segregation system”, Manufacturing Technology Today, Vol. 9 Issue 11-12, Nov. 2010, pp 31-36. (ISSN: 0972-7396)
68. M.Chandrasekaran, M.Muralidhar, C.Murali Krishna, U.S.Dixit, “Application of Soft Computing techniques in machining performance prediction and optimization: a literature review”, Int.J.Adv.Manuf.Technol.(IJAMT)Vol.46, 2010, pp. 445–464.
69. Murali Krishna, M.Chandrasekaran, Aveek Das, RupakDey, “Single Assembly Line balancing Problems”, Productivity Journal, Vol.44, N0.3, Oct-Dec. 2003, pp 396–401.
70. D.Bose, M.Chandrasekarn, S.Paul, P.Baruah, “Design of a pneumatic circuit for component assembly”, Manufacturing Technology Today (MTT), Vol.2, Issue 10, Oct 2003, pp 3-6. (ISSN: 0972-7396)
71. M.K.Tiwari, M.Chandrasekaran, R.P.Mohanty, “Use of Timed Petri net and activity cycle diagram methodologies for modelling tandem AGVs in FMSs and their performance evaluation”, Int. J.ComputerIntergrated Manufacturing, Vol.14, No.4, 2001, pp. 399–408.

1. Singh V, Chandrasekaran M, Samanta S. Study of Weld Bead Characteristics and Optimization during FCAW of AISI 201LN, Presented in the International Conference on Advancements in Aeromechanical Material and Manufacturing (ICAAMM-2020). MLR Institute of Technology, Hyderabad, July 24-25, 2020.
2. Devarasiddappa, D.; Chandrasekaran, M.;Palanikumar, K. Taguchi analysis of MRR and PC for sustainable machining of Ti6Al4V alloy using WEDM process. Presented in International Conference on Advances in Material Science and Mechanical Engineering (ICAMSME 2020), N.B.K.R.I.S.T., Vidyanagar, Andhra Pradesh, India, 7-9 Feb 2020.
3. Singh V, Chandrasekaran M, Samanta S.Study on the influence of heat input on mechanical property and microstructure of weld in GMAW of AISI 201LN Stainless steel, Presented in theInternational Conference on Advances in Material Science and Mechanical Engineering (ICAMSME-2020).NBKRIST, Vidyanagar, India, Feb 7-9, 2020
4. Shubhajit Das, M. Chandrasekaran, S. Samanta, “Experimental study and RSM modeling on machining characteristics of wire cut EDM of hybrid nano metal matrix composites”, Presented in International Conference on Materials, Manufacturing and Machining (ICMMM 2019), AIP Conference Proceedings 2128, 040008 (2019); https://doi.org/10.1063/1.5117970.
5. Sweety Mahanta, M. Chandrasekaran, SutanuSamanta and C.Sasikumar (2019) Fabrication of Al7075-B4C-fly ash hybrid nanocomposites by ultrasonic assisted stir casting and tensile analysis. AIP Conference Proceedings, Vol. 2128, No. 1, p. 020026.
6. Sweety Mahanta, M. Chandrasekaran, S. Samanta and C. Sasikumar, Fabrication of Al7075-B4C-fly ash hybrid Nano composites by ultrasonic assisted stir casting and tensile analysis, Presented in International Conference on Materials, Manufacturing and Machining (ICMMM 2019), AIP Conference Proceedings 2128, 020026 (2019); https://doi.org/10.1063/1.5117938.
7. D. Devarasiddappa, M. Chandrasekaran, M. RaviKumar, and M. Thirugnanasambandam,_.   Modified Teaching Learning Based Optimization for Maximization of MRR in Wire-cut EDM of Ti6Al4V Alloy for Sustainable Production, Presented in International Conference on Materials, Manufacturing and Machining (ICMMM 2019), AIP Conference Proceedings 2128, 040007 (2019); https://doi.org/10.1063/1.5117969.
8. BishubChoudhury, M. Chandrasekaran, and M. Thirugnanasambandam,_.Investigation of weldment area and ultimate tensile strength of weld during GTAW of Inconel 825. Presented in International Conference on Materials, Manufacturing and Machining (ICMMM 2019), AIP Conference Proceedings 2128, 030016 (2019); https://doi.org/10.1063/1.5117959
9. Vivek Singh, M. Chandrasekaran, S. Samanta and M. Thirugnanasambandam, Artificial Neural Network Modelling of Weld Bead Characteristics during  GMAW of Nitrogen Strengthened Austenitic Stainless Steel, , Presented on International Conference on Materials, Manufacturing and Machining (ICMMM 2019), AIP Conference Proceedings 2128, 020024 (2019); https://doi.org/10.1063/1.5117936.
10. Singh V, Chandrasekaran M, Samanta S. Investigation on Weld Bead Geometry of AISI 201LN in GMAW-Cold Metal Transfer (CMT) Process, Presented in the International Conference on Advances in Materials and Manufacturing Engineering (ICAMME –2019). KIIT, Bhubaneswar, India, March 15-17, 2019
11. AkshayBohra, M. Chandrasekaran, N. Teyi, Bone drilling investigation and possible research: A state of the art review, Presented in International Conference on Materials, Manufacturing and Machining (ICMMM 2019), AIP Conference Proceedings 2128, 050022 (2019); https://doi.org/10.1063/1.5117994.
12. Devarasiddappa, D.; Chandrasekaran, M. (2018) PCA-GRA Integrated Multi Response Optimization of Wire-Cut EDM of Ti-6Al-4V Alloy for Sustainable Production, Presented in the International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME18),NIT Meghalaya, Shillong, India, Nov 8-10, 2018.(The paper was conferred with the Best Oral Presentation Award in the IC-RIDME18.)
13. Devarasiddappa, D., Chandrasekaran, M., Sambandam, M.T. (2018) Taguchi Analysis of Power Consumption in Wire-Electrical Discharge Machining of Ti-6Al-4V Alloy for Sustainable Production. Presented through webinar in National Conference on Energy, Ecology and Environment (NCEEE18),2-3, Aug 2018, Bannari Amman Institute of Technology, Sathiyamangalam, Tamilnadu.
14. Vivek Singh, M. Chandrasekaran, S. Samanta, Modelling and optimization Gas metal arc welding of nitrogen strengthened austenitic stainless steel (AISI 201Gr), Presented in the International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME18),NIT Meghalaya, Shillong, India, Nov 8-10, 2018.
15. D.Sarma, J.Sonowal, M.Paul, A.Bezbaruah, M.Chandrasekaran and A.K.Sahoo, Hard turning investigation of AISI 4340 steel and multi response optimization. Presented in the International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME18),NIT Meghalaya, Shillong, India, Nov 8-10, 2018.
16. Shubhajit Das, M. Chandrasekaran, S. Samanta, “Comparison of Mechanical properties of AA6061 reinforced with (SiC/B₄C) micro/nano ceramic particle reinforcements”, Presented in the 8^thInternational Conference on Materials Processing and Characterization (ICMPC-2018), 16^th -18^th March 2018, Hyderabad, India.
17. Shubhajit Das, M. Chandrasekaran, S. Samanta, “Experimental investigation, modeling and optimization of tribological parameters of Al6061 (SiC/B₄C) Hybrid Nano Composites”, Presented in the 2^ndInternational Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM 2018), Hyderabad, 13^th -14^th July 2018.
18. Shubhajit Das, M. Chanddrasekaran, S. Samanta, “Tribological investigation of Al6061/SiC/B₄C hybrid nano metal matrix composites and its predictive model using fuzzy logic”, Presented in the 4^th International Conference on Industrial Engineering (ICIE), December 21-23, 2017, SVNIT, Surat, India.
19. Sweety Mahanta, Sutanu Samanta and M. Chandrasekaran (2017) “Processing and Investigation of Tribological Properties of Basalt Epoxy Composites”, Materials Today: Proceedings 4, 8185–8191, doi.org/10.1016/j.matpr.2017.07.160.
20. DhrubajitSarma, M. Chandrasekaran, M. T. Sambandam, “Sustainable modelling for machining Inconel 718 and parametric optimization” Proceedings of ICMTS, IIT Madras, pp. 260-264, 2017.
21. PallabSarmah, M. Chandrasekaran, R.Ramesh, “Experimental investigation and multiple performance characteristics of WEDM process on Al 6063/ZrSiO4 metal matrix composites” Published in the Proceedings of ICMTS, IIT Madras, pp. 275-279,2017.
22. Shubhajit Das, M. Chanddrasekaran, S. Samanta, “Tribological investigation of Al6061/SiC/B₄C hybrid nano metal matrix composites and its predictive model using fuzzy logic”, Presented in the 4^th International Conference on Industrial Engineering (ICIE), December 21-23, 2017, SVNIT, Surat, India.
23. SweetyMahanta, M. Chandrasekaran, S. Samanta, D. Devarasiddappa (2017) “ANN Modelling of Tribological Properties for Al-7075 Hybrid Nano MMC”, Presented in the National Conference on Recent Trends in Engineering Science, Technology and Management (NCRTESTM), Nov 8-9, 2017.
24. SweetyMahanta, M. Chandrasekaran, SutanuSamanta (2017) "EDM of Al7075-B4C-flyash metal matrix nanocomposites and optimization of sustainable measures using genetic algorithm", Presented in the webinar of National exhibition and conference on new and renewable energy. School of Tech., Assam Don Bosco University.
25. SweetyMahanta, M. Chandrasekaran, SutanuSamanta (2017) "ANN Modelling of Tribological properties for Al-7075 hybrid nano MMC", Presented in the National Conference on Recent Trends in Engineering Science, Technology and Management (NCRTESTM), Nov 8-9, 2017 at Rajiv Gandhi  Govt. Polytechnic, Arunachal Pradesh.
26. D. Devarasiddappa, M. Chandrasekaran and M.T. Sambandam (2017) “Multi Performance Optimization in Wire cut EDM of Inconel 825 using Desirability Function coupled with Analytical Hierarchy Process”, Presented in the International Conference of Materials, Manufacturing and Modeling.
27. D. Devarasiddappa, M. Chandrasekaran (2017) “Artificial Neural Network Approach for Modelling and Prediction of Performance Measures in a Machining Process – a Case Study”, Presented in the National Conference on Recent Trends in Engineering Science, Technology and Management (NCRTESTM), Nov 8-9, 2017.  
28. Devarasiddappa, D.; Chandrasekaran, M.; Jees, G. “Improvement in Surface Roughness and Dimensional Accuracy in WEDM of Inconel Alloy”, In proceedings: 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR), December 16-18, 2016, College of Engineering, Pune, Maharashtra, pp 1942-1946. ISBN: 978-93-86256-27-0
29. Shubhajit Das, M. Chandrasekaran, S. Samanta, “Parametric Analysis and Optimization of WEDM of Al6061/ 7% SiC/ 3% B4C Hybrid MMCs”, 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016, College of Engineering, Pune, Maharashtra, 1991-1995, ISBN: 978-93-86256-27-0.
30. D. Devarasiddappa, Jees George, M. Chandrasekaran and NabamTeyi. “Application of Artificial Intelligence Approach in Modeling Surface Quality of Aerospace Alloys in WEDM Process”, Procedia Technology, Vol. 25, 2016, 1199-1208. DOI:10.1016/j.protcy.2016.08.239
31. M. Chandrasekaran, S.K. Tamang, Jees Gorge and R. Thirumalai, "AHP Coupled with Grey Relational Analysis for Optimization Multiple Characteristics of CNC Wire Cut EDM Parameters", Presented in the International Conference on Mechanical and Building Sciences, 23-24th March, SNS college of Technology, Coimbatore,  ISBN 978-93-85477-78-2, 2016 pp. 353-358.
32. S. K. Tamang, M. Chandrasekaran and R. Thirumalai , " Sustainable Machining of Inconel 825 to Optimize Multiple Performance Characteristics using Utility Approach", Presented in the International Conference on Mechanical and Building Sciences, 23-24th March, SNS college of Technology, Coimbatore,  ISBN 978-93-85477-78-2, 2016 pp. 353-358.
33. M. Chandrasekaran, Shubhajit Das, D. Devarasiddappa, “Determining the effect of cutting parameters on surface roughness in end milling of Al-356/SiCp MMC using fuzzy logic” International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 9), December 10-12, 2015, IIT Bombay, Maharashtra, India.
34. M. Chandrasekaran, A. Michi, S. Samanta and S.K. Tamang, “Experimental Investigation and Grey Relational Analysis for Multi-Response Optimization of Wire Electrical Discharge Machining Process” Presented in the Aspects of Mechanical Engineering and Technology for Industry (AMETI -2014), NERIST, A.P. Dec 6-6, 2014, pp. 373-380.
35. JeesGeorge and M. Chandrasekaran,” Machining of Aerospace Alloys and MMC Using Different EDM Processes: A Literature Review on Process Modeling and Optimization”, Presented in the Aspects of Mechanical Engineering and Technology for Industry (AMETI -2014), NERIST, A.P. Dec 6-6, 2014, pp. 278-284.
36. M.Chandrasekaran and Santosh Tamang, “Desirability analysis and genetic algorithm approaches to optimize single and multi-response characteristics in machining Al-SiCpMMC”, Presented in the 5^th International & 26^th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), December 12th–14th, 2014, IIT Guwahati, Assam, pp 653-1 to 653-6.
37. SantoshTamang and M. Chandrasekaran, “Application of grey fuzzy logic for simultaneous optimization of surface roughness and metal removal rate in turning Al-SiCp metal matrix composites”, Presented in the 5^th International & 26^th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), December 12th–14th, 2014, IIT Guwahati, Assam, pp 832-1 to 832-7. 
38. Rahul Singh, Vikash Kumar, Shiv Sharma and M.Chandrasekaran, “Regression modelling and simultaneous optimization Ra, Fz and Fy in turning Inconel 825 super alloy using carbide insert”, Presented in the International Mechanical Engineering Congress 2014 (IMEC 2014),  NIT, Trichirapalli, Tamilnadu, June 13–15, 2014.
39. Debtanay Das, Parikshit Bhowmik, Nitesh Kumar Jha and M. Chandrasekaran, “State of the Art in Machining Hybrid Metal Matrix Composites with an Emphasis to EDM Process” Presented in the Aspects of Mechanical Engineering and Technology for Industry (AMETI -2014), NERIST, A.P. Dec 6-6, 2014, pp. 364-371.
40. Shiv Sharmaand M. Chandrasekaran, “Modeling and Optimizing Multi Performance Characteristics in Turning GFRP Composites Using Polycrystalline Diamond Tool”, Presented in the Aspects of Mechanical Engineering and Technology for Industry (AMETI -2014), NERIST, A.P. Dec 6-6, 2014, pp. 291-298.
41. ArnabSarmah, AvikBal, M. Ravi Sankar,S. Samanta4 and M. Chandrasekaran, “Experimental Study and Modeling of Micro Scratch Based Tribological Characterization of Al Alloy-Sic Metal Matrix Composite”, Presented in the Aspects of Mechanical Engineering and Technology for Industry (AMETI -2014), NERIST, A.P. Dec 6-6, 2014, pp. 184-190.
42. M.Chandrasekaran, SantoshTamang, Sumit Kumar and Manish Sharma, “Modeling and optimization of machining parameters in milling Al-SiCp metal matrix composites using Taguchi method and regression based GA” Presented in the International Conference on Mechanical Engineering: Emerging Trends for Sustainability (ICMEETS’14) held at MNIT, Bhopal, India, during 29–31, January, 2014.
43. Shiv Sharma, M.Chandrasekaran, “Sustainable production: selection of optimum turning condition with the trade-off between product quality and economic aspects,” Published in the International Conference on Mechanical Engineering: Emerging Trends for Sustainability (ICMEETS’14) held at MNIT, Bhopal, India, Jan 29–31, 2014.
44. SantoshTamang and M.Chandrasekaran, “RSM modeling for surface roughness and tool wear in Turning Al-SiCp MMC and Overlay contour plot for optimal parameters selection”, Presented in the National conference on Recent Advancements in Mechanical Engineering to be held at NERIST, Nirjuli on Nov. 8–9, 2013.
45. Chandrasekaran, M. and Tamang, Santosh, “Optimization for Sustainable Production with the trade-off between MRR and TWR in Micro Electrical Discharge Drilling Process”, Presented in the International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING (COPEN-8: 2013) to be held in National Institute of Technology, Calicut, India, 13–15, December, 2013.
46. Shiv Sharma and M.Chandrasekaran, “Multi parametric optimization of turning Inconel 718 by Taguchi Desirability Function Analysis”, Presented in the National conference on Recent Advancements in Mechanical Engineering held at NERIST, Nirjuli, A.P., Nov. 8–9, 2013.
47. S.Tamang, M.Chandrasekaran, S.Samanta, “Application of computational methods in modeling and optimization of composite machining processes: A Literature Review”, Presented in the 3rd International Conference on Recent Advances in Material Processing Technology (RAMPT’2013), pp. 210–213.
48. M. Chandrasekaran, D. Devarasiddappa, “Modeling for Surface Roughness Prediction in cylindrical grinding of Al-SiCp metal matrix composites using artificial neural network and ANOVA analysis”, Presented in the 3rd International Conference on Recent Advances in Material Processing Technology (RAMPT’2013), pp.65–68.
49. Manish Sharma, Sumit Kumar, M. Chandrasekaran, “Parametric optimization for obtaining minimum surface roughness in an end milling process using Taguchi design method and development of statistical regression modeling”, Presented in the 2nd International Conference on Advanced Manufacturing and Automation (INCAMA-2013).
50. J. Singh, S. Samanta, M. Chandrasekaran, “Modeling of Ultrasonic Imaging of an Impacted Composite Domain Using the Artificial Neural Network and its Evaluation”, Presented in the 2nd International Conference on Advanced Manufacturing and Automation (INCAMA-2013).
51. SantoshTamangandM.Chandrasekaran, “Optimizing of Pulsed Nd: YAG Laser Micro Machining Process using Taguchi-Grey Technique’, Presented in the National conference proceeding on Advanced Welding Technology (AWT’13) held in NERIST, 2013, pp.21–28.
52. D. Devarasiddappa and M.Chandrasekaran, “Development of surface roughness prediction model and parameters optimization in machining Al-SiCp metal matrix composites”, Presented in the 4th International & 25th AIMTDR Conference, Jadavpur University, Kolkatta, 14–16th December, 2012.
53. Sai Prasad OjhaandM.Chandrasekaran, “ Design and Development of web enabled machining system for common machine tool operations”, Presented in the Int. Conf. on Advances in Manufacturing Technology (ICAMT 2012),  Kundrathur, Chennai, June 15-17, 2012, pp 128–131.
54. D.Siddappa, M.Chandrasekaran, A.Mandal, “Artificial neural Network Modelling for Predicting Surface Roughness in End Milling of Al-SiCp Metal Matrix Composite and Its Evaluation”, Presented in the International Conf on Intelligent Manufacturing Systems (ICIMS 2012), Sastra University, Tanjavur, Tamilnadu, pp 119–125.
55. M.Chandrasekaran, M.Muralidhar,U.S.Dixit, “Fuzzy set based online optimization of finish Milling process”, Presented in the National conference on Advanced Design and Manufacture NCADM-2011, Einetein College of engg., Tirunelveli, TN, Jan. 6–7,2011.
56. Anjan Kumar Kakati, M. Chandrasekaran, Amitava Mandal and Amit Kumar Singh, “Experimental Investigation in End Milling of Aluminium Alloy Using Carbide Tool and Its Neural Network Model”, Proc. of the National Seminar (ETME-2011), Bhubaneswar, India, Jan. 2011, pp. 234–246.
57. M.Chandrasekaran, M.Muralidhar and U.S.Dixit, Fuzzy set based online optimization of finish milling process, Presented in the National Conference on Advanced Design and Manufacture (NCADM 2011), pp.132–137, Einstein College of Engineering, Thirunelveli, Tamilnadu, India, January 6–7, 2011
58. M.Chandrasekaran, M.Muralidhar, U.S.Dixit, “Optimization of Engineering Problems by Fuzzy set Theory: An Application to Multipass Turning Process”, Presented in the 4th International Multi Conference on Intelligent systems and Nanotechnology (IISN-2010), ISTK, Kalwad, Haryana, Feb. 26–28, 2010.
59. A.K.Singh, M.Chandrasekaran, and C.M.Krishna, “Optimization of Finish-pass milling process with practical constraints using particle swarm intelligence”,  Presented in the 3rd International & 24th AIMTDR (All India Manufacturing Technology, Design and Research) Conf., Visakhapatnam,  December 13–15, 2010
60. M.Chandrasekaran, M.Muralidhar, U.S.Dixit, “Optimization of Finish pass Turning process with Online Learning”, Presented in the 3rd International & 24th AIMTDR (All India Manufacturing Technology, Design and Research) Conf., Visakhapatnam,  December 13–15, 2010.
61. C.Murali Krishna, M.Chandrasekaran, U.S.Dixit, “Strategic Management of product Development Process Capability using Neural Network Approach”, Presented in the IEEE International Conference on Advanced Management Science, Chengdu, China, July 9–11,2010.
62. M.Chandrasekaran, M.Muralidhar and U.S.Dixit, Optimization of Engineering problems by fuzzy set theory: An Application to Multipass Turning process, International Multi Conference on Intelligent Systems and Nanotechnology, Institute of Science and Technology Kalwad (ISTK) Jamuna Nagar, Haryana, India, February 26–28, 2010.
63. M.Chandrasekaran, M.Muralidhar and U.S.Dixit, Optimization of Finish Turning process with Online Learning, Presented in the 3rd International and 24th All India Manufacturing Technology Design and Research (AIMTDR) conference, pp. 951–956, Andhra University, Visakhapatnam, Andhra Pradesh, India, December 13–15, 2010.
64. SeemaLingi, C.Murali Krishna, A.Mandal, M.Chandrasekaran, “ A genetic Algorithm Approach for Minimizing Makespan in Job cell Scheduling Problems”, Presented in the International conference on Advances in Mechanical Engineering, S.V.N.I.T,Surat, Aug. 3–5, 2009.
65. M.Chandrasekaran, S.Mahto, Chandan Singh, N.U.Ahamed, .B.Singh, “Design of Dynamic cellular manufacturing system; An approach to minimize reconfiguration cost”, Presented in the International Conference on Advanced in Mechanical engineering (ICAME-2007), MIT, Manipal, Oct 24–26, 2007.
66. M.Chandrasekaran, U.K.Saha, Jaivardhan, A.Chakraborty, Om Prakash, “Job shop scheduling: An approach to Minimize tardiness”, Presented in the 14 thISME International Conference on Mechanical Engineering in Knowledge Age, Delhi College of Engg., Delhi, Dec. 12–14, 2005.
67. M.Chandrasekaran, “Life Cycle Design: A  Consequence of Concurrent Engineering”, Presented in the National Conference on World Class manufacturing, Amrita Institute of Technology, Coimbatore, May 7–9,2003.
68. M.Chandrasekaran, C.Murali Krishna, M.Suhu, A.Peter, “Facility layout design in cellular manufacturing”, Presented in the 20th AIMTDR Conf., Birla institute of Technology, Mesra, Ranchi, 13–15 Dec. 2002.
69. D.Bose, M.Chandrasekaran, S.Chandra, A.Pukhan, Ajay Dhar, “Circuit Design aspects of a Pneumatic system for stamping and clamping operation”, Presented in the 10th National Conf. on Machine and Mechanisms (NaCoMM-2001), IIT, Kharagpur, 21–22 Dec., 2001, pp. 273-280.
70. M.Muralidhar, M.Chandrasekaran, “Process selection in metal casting uses analytical hierarchy process for an automotive piston”, Presented in the National conf. on Mechatronics in Manufacturing, Birla Institute of Technology, Mesra, Ranchi, March 25–26, 2000.
71. M.Chandrasekaran, G.P.Prabukumar, R.N.Ghatge, R.Sureshkumar, “Management information system for manufacturing”, Presented in the National conf. on Information Technology:Challenges-Vision 21st Century, G.B.Pant Engg. College, Pauri, Garhwal, June 26–27, 2000.