पूर्वोत्तर क्षेत्रीय विज्ञान एवं प्रौद्योगिकी संस्थान
North Eastern Regional Institute of Science and Technology 
deemed-to-be-university under MHRD, Govt.of India
Nirjuli - 791109, Arunachal Pradesh
Skip to main content
faculties

Sandeep Singh

Associate Professor

Tribology, Mechanical Vibrations, Rotordynamics, Signal Processing and Identification

E-mail: Sandeep[AT]nerist(dot)ac(dot)in; sandeep@nerist.ac.in, sandeepsingh_186@yahoo.co.in
Phone(EPBX/Office): 03602257401-8 Extn. 6224

  • Professional Background
  • Honors and Awards
  • Educational Details
  • Administrative Background
  • Development of Robotics Laboratory
  • Memberships in Professional bodies
  • Teaching Engagements
  • Projects and Thesis Supervised/ Currently Supervising
  • PHDs Supervised
  • Participation in short term courses
  • Courses or Conferences Organised
  • Special Lectures Delivered
  • Publications
FROM TO DESIGNATION ORGANISATION
01/07/2015 Till date Associate Professor NERIST, Nirjuli, Itanagar
30/06/2010 30/06/2015 Assistant Professor NERIST, Nirjuli, Itanagar
01/07/2008 29/06/2010 Scientific Officer –D IGCAR, Kalpakkam, TN
09/07/2001 30/06/2008 Lecturer NERIST, Nirjuli, Itanagar
Award Institute Year
Nil    
Degree Subject University Year
PhD Design IIT, Guwahati 2015
M.Tech. Tribology

RIT, Jamshedpur

(Ranchi University)
2000
B.Sc.(Engg) Mechanical Engg.

RIT, Jamshedpur

(Ranchi University)
1995
AISSCE PCMBE TNSSS, Gangtok (CBSE) 1991
AISSCE Matriculation

TNSSS, Gangtok (CBSE)

1989
From To Designation Organisation
22/08/2016 10/10/2018 Chief Warden NERIST
30/06/16 31/08/2018 Chairman Gymkhana NERIST
30/06/16 31/08/2018 Coordinator- SHRISTI NERIST
10/10/2018 Till Date Coordinator- IPR Cell NERIST
MHRD 2004
Tribology Society of India, Life Member
ISTE, Life Member
Title Course Code Module Semester
Finite Element Methods ME7102 PG 1
Fundamentals of Mechanical Engineering ME4121 Diploma 1
Modelling of Manufacturing Process ME7203 PG 2
Automobile Engineering ME4005 Diploma 2
Machine Design ME 5201 Degree 2
Mechanical Vibrations ME 6003 Degree 2
Engineering Drawing ES 1151 Base 1

Project Title

Students

M.Tech

Vibration analysis of a two wheeler negotiating a speed bump

Mr. Sukumar Paul

Theoretical Design and Development of an Active Magnetic Bearing

Mr. Pranjal Sonowal

Natural Convection in a nano-fluid filled square enclosure

Miss Barbie Leena Barohi

Analytical studies on automatic balancing with free mass

Mr. Krynkupar Lynra

B.Tech.

Design and Development of a Galling Test Fixture as per ASTM –D-196

Sumit Sen

Fourier analysis of Road hump geometries

Priam Dutta and Aditya Kumar Sinha

Design of a test rig for evaluation of fretting

Aritra Sen and Jayabrata Das

Design and Development of non dripping oil dispenser

Alok Nath Gupta et. al

 

Topic Scholar Name Status of PHD Registration Year
Nil      
Course Name Sponsored By Date
GIAN Course on Vibration Problems in Rotating Machines: Diagnosis and Rectification  (171030L02) at NIT Rourkela Self February 18 – March 1, 2019
Conference Name Sponsored By Date
Nil    
Title Place Date
Nil    
  1. Singh, S., & Tiwari, R. (2018). Model based identification of crack and bearing dynamic parameters in flexible rotor systems supported with an auxiliary active magnetic bearing. Mechanism and Machine Theory, 122, 292–307. https://doi.org/10.1016/j.mechmachtheory.2018.01.006
  2. Singh, S., & Tiwari, R. (2017). Model-based fatigue crack identification in rotors integrated with active magnetic bearings. JVC/Journal of Vibration and Control, 23(6), 980–1000. https://doi.org/10.1177/1077546315587146
  3. Singh, S., & Tiwari, R. (2016). Model-Based Switching-Crack Identification in a Jeffcott Rotor With an Offset Disk Integrated With an Active Magnetic Bearing. Journal of Dynamic Systems, Measurement, and Control, 138(3), 031006. https://doi.org/10.1115/1.4032292

List of PFBR Reports (Confidential reports and notes of Department of Atomic Energy, related to Prototype Fast Breeder Reactor Project at IGCAR, Kalpakkam)

  1. Sandeep Singh et al. (2009) Interim report on friction and wear testing of xylan coated silicon rubber vs teflon (PTFE) coated carbon steel, PFBR/31300/EXP/1075, Rev-0
  2. Sandeep Singh et al. (2009) Friction and wear testing of MoS2 coated silicon rubber vs teflon(PTFE) coated carbon steel, PFBR/31300/EXP/1074, Rev.-0

List of Conference Publications

  1. S. Singh et.al.  (2003)  Design and development of a heating apparel jacket based on Joules law of heating            CARTAM-2003, P434-443
  2. S. Singh et.al.  (2003)  Experimental method for forcasting the wear rate of a journal bearing and its variation with clearance space, ICME-2003at BUET , Dhaka
  3. S. Singh et.al. (2005) Experimental determination of chip curl radius dependence on geometry of the chip breaker in orthogonal cutting, ISME-International conference on mechanical engineering in knowledge age
  4. S. Singh et.al.  (2005)  Performance improvement of journal bearing: a case study PMGQ2005, Page469-471
  5. Sandeep Singh et al. (2010) Tribological Behaviour of Fluorocarbon Coatings under Varying Sodium Exposure Level, in Surface Modification Technologies XXIII:  Editors- T S Sudarshan, U K Mudali and Baldev Raj, ISBN 9788191057102,  Valar Documents https://books.google.co.in/books?id=hnRoMwEACAAJ
  6. Sandeep Singh et al. (2010) On suitability of Molycote as Coating Material on Silicone Rubber for Dynamic Seals, in Surface Modification Technologies XXIII:  Editors- T S Sudarshan, U K Mudali and Baldev Raj, ISBN 9788191057102,  Valar Documents https://books.google.co.in/books?id=hnRoMwEACAAJ
  7. Sandeep Singh and Utpal Borah (2014) Some results of Pin on Disc Tribological Evaluation of 316LN stainless steel, in Aspects of Mechanical Engineering and Technology for Industry (AMETI -2014), NERIST, A.P. Dec 6-6, 2014, ISBN 9789383842957
  8. Sandeep Singh and Radak Blange (2015) A critical comparison of regression based and FFT based signal Processing for Identification of full spectrum of quadrature signal for rotor dynamics application, National conference on computing, communication and information processing (NCCCIP-2015) ISBN: 978-93-84935-27-6
  9. Sandeep Singh, Pradip Lingfa, Aditya Sinha, Sushmita Devi, Th. Siddhartha Singh, Utkars Anand (2017). "Tribological Characterization of Some oils used in fabrication of bio diesel". National Conference on Environmental Pollution in Context to the Growing Industries, proceedings published by IJRETS (ISSN 2454-1915). vol.VII, special issue, PP.6 pages, Jan 2017.

List of Book Chapters

  1. Sandeep Singh and Rajiv Tiwari (2016) Finite element model based crack force identification in a rotor system integrated with active magnetic bearing, VIRM 11 - Vibrations in Rotating Machinery. London : Institution of Mechanical Engineers, 2016. ISBN 978-0-9572374-8-3
  2. Nabam Teyi and Sandeep Singh (2019)  Handling Phase Ambiguity in Full Spectrum from FFT,  in  Advances in Material Sciences and Engineering, Eds. Awang, Mokhtar, Emamian, Seyed Sattar, Yusof, Farazila, Springer, ISBN 978-981-13-8297-0, https://doi.org/10.1007/978-981-13-8297-0_54
  3. Hemanta Doley, Sandeep Singh and Nabam Teyi  (2019) Design and Development of Apparatus for Evaluating Galling Resistance and Test,  in  Advances in Material Sciences and Engineering,Eds. Awang, Mokhtar, Emamian, Seyed Sattar, Yusof, Farazila, Springer, ISBN 978-981-13-8297-0,  https://doi.org/10.1007/978-981-13-8297-0_56