The theoretical knowledge imparted to the students is further supplemented by the practical classes. The infrastructure of the Department includes well equipped Power System Lab, High Voltage Engineering Lab, Electrical Machine Lab, Power Electronics Lab, Digital and Microprocessor Lab, Maintenance Lab, Electrical Workshop, Circuits and Measurement Lab, Control and Instrumentation Lab, PC Lab with internet connectivity, Energy Systems Lab and Project and Research Lab. Some of the equipment and software available in the various laboratories are detailed as under.
Electrical Workshop Lab
This lab is also dedicated to the students of Base module who are expected to learn hands on training on electrical wiring and related activities. This laboratory is equipped with Mini Lathe Machine, Winding Machine, Drilling Machine, Cubical for different types of Wiring Practice, Necessary tools, Tools Display Boards, 1-phase and 3-phase Energy meters, Charts etc.
| Lab Incharge | Mr. Anu Kumar Das |
|---|---|
| Lab Assistant | Mohandas B.B. |
Electrical Maintenance Lab
This lab is mainly for the students of Base module who are expected to learn hands on training on repair and maintenance of electrical appliances. Number of appliances such as Domestic Refrigerator, Air conditioners, Geysers, Heat Convectors, Table and Ceiling Fans, Vacuum Cleaner, UPS set, Water Cooler, Hot Plate, Immersion Heater, Different types of lamps with fittings, Oscilloscopes, Working Models for Electrical Circuits of Automobiles(in order) etc.
| Lab Incharge: | Mr. Akhilesh Sharma |
|---|---|
| Lab Assistant | Mr. Sri Niwas Singh |
Project and Research Lab
Modelling and simulation works are carried out in this lab mainly by postgraduate students and research scholars. Twenty PCs with 4 GB RAM has been provided in the lab. Uninterrupted internet connectivity is made available so that the students can browse and download journal/conference papers from institutionally subscribed site such as IEEE explore, Science Direct, Elsevier, etc. The lab has a printer, LCD projector and a Scanner to cater the needs of the students
| Lab Incharge | Ms. Piyali Das |
|---|---|
| Lab Assistant |
Circuits and Measurement Lab
Wave Analyser, Double Channel Recorder, Analog Oscilloscope, DC Power supply unit (0-300V), DC power supply (0-60V) and Storage adapter, Wheatstone Bridge, Kelvin Double Bridge, VTVM, Instrumentation Tutor, Digital Storage Oscilloscope (2-channel), HP Computer (Pentium-III), LCR-Q Meter, Meggar, etc. are some of the equipment available in this lab.
| Lab Incharge | Dr S.K. Bhagat |
|---|---|
| Lab Assistant | Mr. Atul Bora |
VLSI LAB
The laboratory is under initial developmental stage. Currently Cadence PG Bundle, Mentor Graphics Verilog Simulators are available for 20 users. When fully developed, this lab will have around Linux based 30 workstations with internet connectivity.
| Lab Incharge | Mr. T.V.P.Singh |
|---|---|
| Lab Assistant |
Control and Instrumentation Lab
This lab has DC Position Servo Trainer Unit, AC Servo Motor Speed/Torque Control Unit, DC Motor Speed Control Unit, Magnetic Amplifier, Synchro Transmitter and Receiver, Experimental PID Controller Unit, Digital ON-OFF Temperature Controller Unit, Analog and Digital Storage Oscilloscope (4-channel), Training and Development System for 8086, Data Acquisition of Control system, Direct Digital Control Training System, IBM Computer (Pentium-III), CA-06 Digital Motor, PC based Analog and Digital Motor Control, Distributed Control system DCS-5000, PC 45/ML programmable control teaching set, Digital Transducer and Instrumentation Trainer, Direct Digital Control System (CA-04), Rotary Servo 9 Plant(Servo 2).
| Lab Incharge | Dr. R.K. Mehta |
|---|---|
| Lab Assistant | Mr. Atul Bora |
Power Electronics Lab
This lab has EMMA Microcomputer, Fast AD/DA converter, DDC Motor Module, Command Potentiometer, LCR Q-tester, SCR Firing Unit, Industrial Electronics Trainer with Oscilloscope, Digital Storage Oscilloscope (4-channel), HP Computer (Pentium-IV), Motion Control Development Kit, MCK240 Development Package with Kit, Thyristor and Motor Control (Make: Feedback, UK), Power-scope, Oscilloscope (Make: Yokogawa), CASPOC Simulation Software, Bedford and Parallel Inverter Trainer kit, Micro Controller based Firing Circuit for Controlled Rectifier trainer kit, Speed Control of Universal Motor using SCR Trainer kit,1-phase controlled Rectifier with cosine Firing Scheme Trainer kit, 1-phase Controlled Rectifier with Ramp comparator firing scheme Trainer kit, IGBT characteristics Trainer kit, 1-phase Cyclo-Converter Trainer kit, Speed Control of AC Motor using TRIAC Trainer kit.
| Lab Incharge | Mr. M.D. Singh |
|---|---|
| Lab Assistant | Mr. D.Roy Choudhury |
PC Lab
The Department has a well furnished PC lab for undergraduate students with more than 40 computers with internet connectivity. Software such as Matlab, Multisim, PSCAD, etc. are installed in all the computers.
| Lab Incharge | Mr. R. Blange |
|---|---|
| Lab Assistant | Mr. Binod Kumar Mistry |
Electrical Machine Lab
The lab has wide range of motors and generators including DC Compound Motor, DC Compound Generator, 3-phase Induction Motor, both Squirrel Cage and Slip Ring type, DC Shunt Motor, DC Series Motor, Universal Motor, AC Synchronous Generator, AC Synchronous Motor, Scan Drive System for DC and AC Drive Speed Control, Motor Fault Simulator, Logic Pulse Generator, Function Generator, Digital Storage Oscilloscope, 3-phase Fluke Power Analyzer, 1-phase Induction Motor and Thyristor Control Panel, DG set, Stepper Motor Training System, PWM based Induction Motor Drive, V/f Controlled AC Drive, d-Space Real Time Simulator software.
| Lab Incharge | Dr. A.K. Singh |
|---|---|
| Lab Assistant | Mr. S.S. Sarkar |
Digital Electronics & Microprocessor Lab
This lab is equipped with Microprocessor Training Kits such as Dyna 8085 , STAR 85, VPL 8086/8088, Micro controller training Kit such as VMC-ICE31/51 and 80C196KC, Advance Handy Serial Programmer, Universal Programmer, Universal and Analog IC tester, Data Acquisition Software, Study Cards such as Memory Decoders, Usart, Programmer Timer, DMA,PPI with timer and Latch Cards, PC based Analog and Digital motor control teaching set, Robotics, Thermocouple, Load Cell, LVDT and DC motor speed control, 485 Protocol based Distributed Control System, Gain Measuring Instruments.
| Lab Incharge | Dr. O.P. Roy |
|---|---|
| Lab Assistant | Mr. Sri Niwas Singh |
Power System and Protection Lab
Power System and Protection lab is equipped with Distribution Line Simulator, PC controlled Power Analyzer, Oil test set, Different types of Electromagnetic and Static Relays, Dielectric Purification Plant, Analog Oscilloscope, Digital Storage Oscilloscope, 3-phase Variable Inductor, 1-phase and 3-phase Loading Rheostats, Digital Clamp or Power meters, LCR-Q meter, 3-phase Capacitor Bank, Capacitance and Tan Delta Test Set, Circuit Breaker Analyzer, Liquid Dielectric Purification Plant.
| Lab Incharge | Mrs. Somila Hashunao |
|---|---|
| Lab Assistant | Mr. Somnai Wangpang |
High Voltage Engineering Lab
This lab houses the latest 100 kV AC/145 kV DC Dielectric Test Set & 300 kV, 7.5 kJ, 1.2/50 microsecond Impulse Test Set, Measuring Sphere Gap MF-100, Electronic Sphere EZK, 2-Channel, 200MHz Digital Storage Oscilloscope with software for direct transfer of data from Oscilloscope to PC.
| Lab Incharge | Dr. S. Chatterjee |
|---|---|
| Lab Assistant | Mr. R.P. Yadav |
Energy Lab
In this lab energy related experiments are performed both by undergraduate and postgraduate students. The lab is equipped with advanced experimental setups such as Photo Voltaic Test Rig, Photo Voltaic Electric Generator, anemometers, solarimeter, etc. Experiments are carried out to plot I-V characteristics of PV modules, determine efficiency of PV driven water pumping system, etc.
| Lab Incharge | Mr. N.L. Meitei |
|---|---|
| Lab Assistant | Mr. R.P. Yadav |